oletrucks
[Top] [All Lists]

Re: [oletrucks] POR15

To: "kirk pierce" <kpierce@charter.net>,
Subject: Re: [oletrucks] POR15
From: "william moldenhauer" <wmh678@worldnet.att.net>
Date: Fri, 16 Mar 2001 22:20:51 -0800
used por 15 on my frame and even fire couldn't take off the finish just
scrubbed and hosed off
Bill 53-3600 hot rod (project again)
Channahon,Ill.
website
www.hotrodstogo.com
Go ahead and take risks....just be sure that everything
 will turn out OK.


----- Original Message -----
From: kirk pierce <kpierce@charter.net>
To: OleTrucks mailing List <oletrucks@autox.team.net>
Sent: Thursday, March 15, 2001 7:02 PM
Subject: [oletrucks] POR15


> I have seen the POR ads in different magazines, but have never tried it.
> I'd be interested to hear stories from folks who have tried this stuff.
> Particularly if it has been several years since you applied it.  Does it
> last?  Does it really prevent rust from coming back?  Does it hold a nice
> finish after being exposed to road grime etc....
>
> -----Original Message-----
> From: Bill Current <bcurrent@csu.org>
> To: stephanie@annexe.cwnet.com <stephanie@annexe.cwnet.com>;
> oletrucks@autox.team.net <oletrucks@autox.team.net>
> Date: Thursday, March 15, 2001 8:41 PM
> Subject: Re: [oletrucks] painting frame
>
>
> >I would recommend you either use POR15 paint, or have it powder coated.
> Depending
> >on how far down you strip the frame would probably determine the route I
> would
> >go.  I plan to have my frame sandplasted and then powder coated.
Checking
> with
> >some local places, I can get it sandblasted for under $100, and then
powder
> coated
> >for under $75.  You do of course have to take EVERYTHING off the fame to
do
> this,
> >but that is the plan.  If you did not want to remove everything, the
POR15
> paint
> >is good stuff, but watch it:  as they say on their products "They know
what
> >permanent means!" and that stuff will not come off after drying.  This is
> >especially important because if you get it on your skin and it dries, it
is
> there
> >till it wears off! BTDT!
> >
> >Good luck,
> >Bill C.
> >52 1/2 ton 'project'
> >
> >
> >stephanie@annexe.cwnet.com wrote:
> >
> >> I'm about to paint my frame off my '53.  What do you guys use for
paint?
> I was
> >> thinking black acrylic.  Any tips before I get started? :) Thanks..
> >> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>