Does anyone out there know the best way to lower a 78 Chevy pickup and still
retain a decent ride. I'm only wanting a 3 or 4 inch drop, nothing too
major. I've seen the kits advertised in the magazines , but was looking for
some real person advise.
Thanks
Rob Butler
Milwaukie, OR
56 Cameo
56 Chevy Panel
77 GMC Jimmy 4x4
78 Chevy Short wide
48 GM 'Trailabout' <project>
SASQUATCH ARTWORKS
Custom Automotive Cartoons
Specializing in Classic Chevy & GMC Trucks
http://www.connieosborne.com/sasquatch/
----- Original Message -----
From: "oletrucks-digest" <owner-0@autox.team.net>
To: <oletrucks-digest@autox.team.net>
Sent: Tuesday, March 13, 2001 3:31 PM
Subject: oletrucks-digest V2 #1252
>
> oletrucks-digest Tuesday, March 13 2001 Volume 02 : Number
1252
>
>
>
> [oletrucks] Repair Bulletins ["Gary L. Perry"
<glperry@fwi.com>]
> Re: [oletrucks] Repair Bulletins
[Passnb4U@aol.com]
> [oletrucks] 51 front-rear ["Ken Standbridge"
<kstandbridge@huck-fyc.com>]
> RE: [oletrucks] Weight, and Width of Art Deco, Towing the truck h ome
["W]
> [oletrucks] heater hoses ["Ronald I. Givens"
<givens@hal-pc.org>]
> [oletrucks] What Wheels fit our oldtrucks. [Alan Quin
<Alan_Quin@bc.sympa]
> [oletrucks] What wheels fit our old trucks [Alan Quin
<Alan_Quin@bc.sympa]
> Re: [oletrucks] on subject and off subject--engines and coke machines
[Ri]
> [oletrucks] Late model bed on TF ["Larry Winters"
<lwin517@ix.netcom.com>]
> Re: [oletrucks] 51 front-rear ["kirk pierce"
<kpierce@charter.net>]
> Re: [oletrucks] Off Subject: spontaneous self-denting?
[gls@4link.net]
> [oletrucks] (no subject) [THE REIDS
<reidx4@gte.net>]
> Re: [oletrucks] Late model bed on TF [B&A Kettunen
<bekett@uslink.net>]
> Re: [oletrucks] 6 bolt wheels
[STMSymank@aol.com]
> Re: [oletrucks] Monroe swapmeet ["Don Simmons"
<tasimmons@cbnn.net>]
> Re: [oletrucks] Off Subject: spontaneous self-denting? ["Don Simmons"
<ta]
> [oletrucks] members photos [Wayne Osborne
<wayne@chevytrucks.org>]
> Re: [oletrucks] Late model bed on TF ["Jays Mail"
<jaybaker@ruralnetwork.]
> Re: [oletrucks] 6 bolt wheels ["william moldenhauer"
<wmh678@worldnet.att]
>
> ----------------------------------------------------------------------
>
> Date: Mon, 12 Mar 2001 10:55:13 -0500
> From: "Gary L. Perry" <glperry@fwi.com>
> Subject: [oletrucks] Repair Bulletins
>
> I'm having trouble with my 98 Blazer plugging heater with "Lifetime"
> anti-freeze coagulating. There is a service bulletin on it and I have
number.
> NOW, is there a site to look up these bulletins or do I need to use snail
mail
> to GM office somewhere. I found site for F*** trucks that has bulletins,
not
> from the Company though. Anyone here ever deal with bullletins? Costs $300
to
> flush my system, new thermostat and rad cap. THEN it may need it twice.
> Unofficially dealer said some have gone back to using regular anti-freeze
and
> have no further problems. I'm gonna flush myself and change to regular
stuff.
> All GM vehicles have this new lifetime coolant, wonder if others are
having
> trouble. Another case of the Company thinking they know what's better for
us,
> HA! I'm out of warranty too, no repair is paid by GM, bummer!
>
> G. L. Perry
> Huntington, IN
> 54 Chevy 2-ton (driver)
> 50 Chevy COE (project)
> 55 GMC COE (project)
> MM Jet Star 3 (tractor)
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 13:50:22 EST
> From: Passnb4U@aol.com
> Subject: Re: [oletrucks] Repair Bulletins
>
> In a message dated 3/12/01 7:57:53 AM Pacific Standard Time,
glperry@fwi.com
> writes:
>
> << I'm having trouble with my 98 Blazer plugging heater with "Lifetime"
> anti-freeze coagulating. There is a service bulletin on it and I have
number.
> NOW, is there a site to look up these bulletins or do I need to use snail
> mail
> to GM office somewhere. I found site for F*** trucks that has bulletins,
not
> from the Company though. Anyone here ever deal with bullletins? Costs
$300 to
> flush my system, new thermostat and rad cap. THEN it may need it twice.
> Unofficially dealer said some have gone back to using regular anti-freeze
and
> have no further problems. I'm gonna flush myself and change to regular
stuff.
> All GM vehicles have this new lifetime coolant, wonder if others are
having
> trouble. Another case of the Company thinking they know what's better for
us,
> HA! I'm out of warranty too, no repair is paid by GM, bummer!
>
> G. L. Perry
> Huntington, IN
> 54 Chevy 2-ton (driver)
> 50 Chevy COE (project)
> 55 GMC COE (project)
> MM Jet Star 3 (tractor) >>
>
>
> Check www.alldata.com, they list a descrpition of the TB's and SB's, but
> not the contents.
>
> Also, the Dept. Of Transportation, or the NHTSA site, forget which one,
has
> TB's and recall's, etc. listed as well.
>
> Mike
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Sat, 11 Mar 2000 15:32:55 -0600
> From: "Ken Standbridge" <kstandbridge@huck-fyc.com>
> Subject: [oletrucks] 51 front-rear
>
> LIST.
> HAVE BOUGHT 51 GMC, BODY HAS BEEN TASKEN OFF NEED INFO ON CHANGING
REAREND
> SO IT IS NOT GEARED SO LOW AS WELL AS FRONTEND SO IT CAN HAVE DISC BRAKES
> NOT DRUM HAVE BEEN TOLD THAT A CHEVY NOVA IN THE MIDDLE SEVENTYS WOULD LET
> ME DO THIS ANY COMMENTS OR SUGGESTIONS HAVE VERY LITTLE KNOWLEDGE ABOUT
THIS
> BUT DO HAVE ALOT OF TIME TO READ AND LISTEN. AND LAST I TOOK THE VIN
NUMBER
> OFF THE TITLE A228365395 ANY DIRECTION ON WHAT IT ALL MEANS
> ALOT OF THANKS KEN
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 14:23:25 -0800
> From: "Willard, Andrew" <andrew.willard@experian.com>
> Subject: RE: [oletrucks] Weight, and Width of Art Deco, Towing the truck h
ome
>
> Tim,
>
> I did this for my 53 panel and had no trouble at all. Their
autotransporter
> is a solid unit. The only thing is, that they have a little scam going
with
> the wiring harness. It only accepts a uhaul connector so you have to buy
> one of their adapters to connect your wiring to the trailer.
>
> I also recommend you call the uhaul in Hastings, they may give you a
better
> price on a one way rental of the trailer and you wouldn't have to tow an
> empty trailer all that way. Don't use the 800 number either. Reserve
> through the uhaul dealer and don't be afraid to negotiate. I happened to
> hit one that had 12 trailers sitting on their lot and the guy was
desperate
> to get rid of them and gave me one for half the normal rate.
>
> Andy Willard
> Tustin, CA
>
> 89 S-10 driver
> 53 panel project
>
>
> - -----Original Message-----
> From: The Slesaks [mailto:foghorn@ev1.net]
> Sent: Saturday, March 10, 2001 5:49 PM
> To: oletrucks@autox.team.net
> Subject: [oletrucks] Weight, and Width of Art Deco, Towing the truck
> home
>
>
> I am getting ready to bick up my 41 GMC LWB pickup. I am planning on
> renting a U-Haul car trailer for this purpose. Has anyone on this list
used
> a U-Haul auto transporter trailer to haul one of your trucks? I just want
> to be sure that it will fit.
>
> Does anyone know the approximate weight, track width, and overall width of
> an Ard Deco Pickup?
>
> I live in Magnolia, Texas, and I want to rent a trailer here, tow it empty
> up to Nebraska, load the truck, and tow it back. I would realy hate to
get
> ther with a rented trailer, and find out that the truck won't fit.
>
> Is there anyone on this list in south central Nebraska? Like around
> Hastings maybe? How is the weather up there these days? Are the roads
> pretty clear? I hope to make this trip next weekend March 17-19. Am I
> pre-mature? Do I need to worry about bad weather this time of year?
>
> Your thoughts and advice will be greatly appreciated.
>
> Regards,
> Tim Slesak
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 17:31:01 -0600
> From: "Ronald I. Givens" <givens@hal-pc.org>
> Subject: [oletrucks] heater hoses
>
> Howdy all,
> Will someone please tell me which heater hose goes where???
> one hose from water pump to ?
> one hose from thermostat housing to?
> what hoses connects to the two heater valve copper tubes(front and back)?
> what hoses connect to the header core cupper tubes right and left?
> thanks for any help,
> 51 gmc 228 motor
> ron givens 51 gmc
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 17:16:28 -0800
> From: Alan Quin <Alan_Quin@bc.sympatico.ca>
> Subject: [oletrucks] What Wheels fit our oldtrucks.
>
> Hi fellow list members.
> Re factory wheels question. My 52 GMC 1/2 ton runs
> on early GMC Jimmy 15 inch by 8 inch 6 bolt white "spoked" factory rally
> type wheels with trim rings and chrome GMC centers. My tires are
> 31X10.5X15 radial truck tires. No inter ference. On 15 years. The
> factory stuff still fits and looks good! Look at it at
> http://sites.netscape.net.alanquin/homepage. I today got my repro floor
> mat from classic Industries and it fits great! Thanks From Alan Quin.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 17:21:39 -0800
> From: Alan Quin <Alan_Quin@bc.sympatico.ca>
> Subject: [oletrucks] What wheels fit our old trucks
>
> Hi fellow list members.
> Re factory wheels question. My 52 GMC 1/2 ton runs
> on early GMC
> Jimmy 15 inch by 8 inch 6 bolt white "spoked" factory rally type wheels
> with trim
> rings and chrome GMC centers. My tires are 31X10.5X15 radial truck
> tires. No inter
> ference. On 15 years. The factory stuff still fits and looks good! Look
> at it at Http://sites.netscape.net/alanquin/homepage
> Today I got my floor mat from Classic Industries and it looks and fits
> great.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: 12 Mar 2001 18:01:02 -0800
> From: Rick Warren <stovebolt@classictruckshop.com>
> Subject: Re: [oletrucks] on subject and off subject--engines and coke
machines
>
> On Sun, 11 March 2001, MarkNoakes@aol.com wrote:
>
> > Mark, you may want to try Hemmings motor news. They
> > have a section devoted to old vending machines and
> > other types of automobile memorbilia. Hope this
> > helps!
>
> > Rick Warren
> > '55 1st 3100
> > White Heath, IL.
> > http://www.expage.com/oldbluu
>
>
> > My brother Brian brought a "shipment" of parts on Saturday, and I sent a
> > bunch of stuff back with him too (a drafting table and an 89 Dodge that
looks
> > great but I never could sell so I just gave it to him. . .it was my
wife's
> > cast-off when she got her Jeep).
> >
> > Essentially, I got my old busted 283, my new 350, and my antique Coke
machine
> > (every restoration shop has to have one, right?).
> >
> > Brian painted my 350 with the PPG gray that is supposed to be the
correct
> > color for the truck engines. It actually looks much darker than what I
> > would've thought, but I like it ok. It's almost a green tinted gray.
When
> > Brian saw it, he decided to buy a can of supposed correct from a resto
> > vendor. . .it's definitely lighter and is almost a blue tinted gray. He
was
> > doing his engine for his 57 Cameo side by side with my Sub engine. Even
> > thought he valve cover lettering was painted on the truck engines, Brian
> > plans to paint his black. Since my engine is much darker, I'll paint my
> > valve cover letters white/beige. I'll get started on putting everything
> > together engine, bellhousing, flywheel, clutch, transmission, etc.
> >
> > I plan to keep the 283 and try to fix the beating the block took when
the
> > engine went years ago. . .(those of you on this list since prehistoric
times
> > may remember the incident). . .it is the original engine for that truck.
> >
> > Question--Where can I find parts for old (40's/50's era) Coke machines?
I
> > need decals, misc mechanical parts, trim pieces, and some of the refrig
> > parts. I had two catalogs that had most of that stuff but loaned them
to
> > Brian and he can't find them (he has a coke machine in his shop as
well). A
> > web search on several engines didn't show up anything I was looking for.
I'm
> > looking for parts; not a resto service. I prefer to do it myself.
> >
> > Mark Noakes
> > Knoxville, TN
> > 58/56 Chevy Suburban
> > 59 GMC Suburban
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
>
> _________________________________________________________________
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 21:41:41 -0800
> From: "Larry Winters" <lwin517@ix.netcom.com>
> Subject: [oletrucks] Late model bed on TF
>
> I am trying to find out what's involved in putting the late model stepside
bed
> (88-2000) on a TF Truck. I have seen several and like the look. I couldn't
> find it in the archives. Has anyone on the list done this? The bed for my
56
> is real ragged and I know I can get a late model bed. Appreciate the help.
>
>
>
> L.R.Winters
> 57 Daily driver
> 56 "6 year project"
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 20:33:01 -0600
> From: "kirk pierce" <kpierce@charter.net>
> Subject: Re: [oletrucks] 51 front-rear
>
> Ken,
>
> I took a different approach with my '57. It has 3.90 factory gears which
> was geared too low. I scrounged around junkyards for muncie transmissions
> with overdrive tailshafts for the muncie 3 speed and after finding a
couple,
> took my 3 speed trans and the tailshafts to a transmission guy. He built
me
> a 3 speed manual overdrive which cut my rpm from about 3000 at 70 mph to
> about 2100 at 70 mph. I have been using it this way for about 3 years
now
> and am not disappointed. However, I drive it less than 1000 miles per
year
>
> Good part of this is that I still have the pulling power of the 3.90
gears,
> but with the overdrive I get better mileage and less wear on the engine.
>
> - -----Original Message-----
> From: Ken Standbridge <kstandbridge@huck-fyc.com>
> To: oletrucks@autox.team.net <oletrucks@autox.team.net>
> Cc: kstanbri@huck-fyc.com <kstanbri@huck-fyc.com>
> Date: Monday, March 12, 2001 4:44 PM
> Subject: [oletrucks] 51 front-rear
>
>
> >LIST.
> > HAVE BOUGHT 51 GMC, BODY HAS BEEN TASKEN OFF NEED INFO ON CHANGING
REAREND
> >SO IT IS NOT GEARED SO LOW AS WELL AS FRONTEND SO IT CAN HAVE DISC BRAKES
> >NOT DRUM HAVE BEEN TOLD THAT A CHEVY NOVA IN THE MIDDLE SEVENTYS WOULD
LET
> >ME DO THIS ANY COMMENTS OR SUGGESTIONS HAVE VERY LITTLE KNOWLEDGE ABOUT
> THIS
> >BUT DO HAVE ALOT OF TIME TO READ AND LISTEN. AND LAST I TOOK THE VIN
NUMBER
> >OFF THE TITLE A228365395 ANY DIRECTION ON WHAT IT ALL MEANS
> > ALOT OF THANKS KEN
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 18:49:07 -0800 (PST)
> From: gls@4link.net
> Subject: Re: [oletrucks] Off Subject: spontaneous self-denting?
>
> << I have a buddy with the following sheet metal dilemma...
> Anyone ever hear of this happening before?
> <Description of spontaneous denting omitted>
>
>
> My dad used to have this problem with his car for about a year after I got
my
> license. Went away when I got my own car. Never did figure out what was
causing
> it.
>
> Regards,
>
> Grant S.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 19:27:07 -0800
> From: THE REIDS <reidx4@gte.net>
> Subject: [oletrucks] (no subject)
>
> Does anyone have the date for the spring Swap Meet at the State
> Fairgrounds in Monroe, WA??
> Thanks.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 22:06:06 -0600 (CST)
> From: B&A Kettunen <bekett@uslink.net>
> Subject: Re: [oletrucks] Late model bed on TF
>
> There was an article on this in one of the truck magazines, Classic Truck
> or Custom Classic Truck about two years ago. It didn't seem too
> complicated. The main thing was to get the lines to match up in the front
> along the running boards, the rest was pretty much a drop on. I seem to
> remember that they added some fiberglass or something to change the lower
> front corners of the box. I agree, when they were done, it looked like it
> was made for the truck.
>
> Bruce Kettunen
> 57 3200
> Mt. Iron, MN
>
> >I am trying to find out what's involved in putting the late model
stepside bed
> >(88-2000) on a TF Truck. I have seen several and like the look. I
couldn't
> >find it in the archives. Has anyone on the list done this? The bed for my
56
> >is real ragged and I know I can get a late model bed. Appreciate the
help.
> >
> >
> >
> >L.R.Winters
> >57 Daily driver
> >56 "6 year project"
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 23:35:18 EST
> From: STMSymank@aol.com
> Subject: Re: [oletrucks] 6 bolt wheels
>
> Kirk
> I have rally wheels off of a late seventys four by four. They look
great.
> Late model
> rally wheels have a far different set back
> Stan symank
> Newberg oR
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 21:08:31 -0800
> From: "Don Simmons" <tasimmons@cbnn.net>
> Subject: Re: [oletrucks] Monroe swapmeet
>
> The Monroe swapmeet is May 19-20.
>
> Don Simmons
>
>
>
> > Does anyone have the date for the spring Swap Meet at the State
> > Fairgrounds in Monroe, WA??
> > Thanks.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Mon, 12 Mar 2001 21:12:09 -0800
> From: "Don Simmons" <tasimmons@cbnn.net>
> Subject: Re: [oletrucks] Off Subject: spontaneous self-denting?
>
> My dad's car only had rear tire problems. They wore out real fast for some
> reason!!!
>
> Don Simmons
> >
> > My dad used to have this problem with his car for about a year after I
got
> my
> > license. Went away when I got my own car. Never did figure out what
was
> causing
> > it.
> >
> > Regards,
> >
> > Grant S.
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Tue, 13 Mar 2001 07:58:48 -0500
> From: Wayne Osborne <wayne@chevytrucks.org>
> Subject: [oletrucks] members photos
>
> A couple have been added to the members page lately...
> Bob Andersen owns this 54-6400 tow truck, he just purchases this from a
car
> dealer and says its not running now but will be in the near future...
> Here the link for viewing... http://chevytrucks.org/users/wayne/bob54.jpg
>
> Alan Quin owns this 52 GMC from Victoria BC, it is the 9300 Canadian
model.
> It has a 350 with open driveline, frame up restore and paint done by the
> Alan in 96, great job Alan...
> http://chevytrucks.org/users/wayne/alan52.jpg
>
> As always, these and 150 or so other members trucks are available for
> viewing at http://www.chevytrucks.org/users/wayne/member.html
>
> Wayne
> Wayne Osborne
> 1956 Chevy Pickup
> LaGrange Ga.
> http://www.chevytrucks.org/users/wayne
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Tue, 13 Mar 2001 05:29:49 -0700
> From: "Jays Mail" <jaybaker@ruralnetwork.net>
> Subject: Re: [oletrucks] Late model bed on TF
>
> I have a real nice TF bed for sell It's a Utility Trailer right now and
> would be easy to get home behind a pickup.
> pulls real nice $500 for the entire thing (needs wood kit) you can see
pics
> of it at my websight www.expage.com/chevylikearock it's a short stepside
> box it has GMC tailgate
> - -----Original Message-----
> From: B&A Kettunen <bekett@uslink.net>
> To: Oletrucks Board <oletrucks@autox.team.net>
> Date: Monday, March 12, 2001 9:28 PM
> Subject: Re: [oletrucks] Late model bed on TF
>
>
> >There was an article on this in one of the truck magazines, Classic Truck
> >or Custom Classic Truck about two years ago. It didn't seem too
> >complicated. The main thing was to get the lines to match up in the
front
> >along the running boards, the rest was pretty much a drop on. I seem to
> >remember that they added some fiberglass or something to change the lower
> >front corners of the box. I agree, when they were done, it looked like
it
> >was made for the truck.
> >
> >Bruce Kettunen
> >57 3200
> >Mt. Iron, MN
> >
> >>I am trying to find out what's involved in putting the late model
stepside
> bed
> >>(88-2000) on a TF Truck. I have seen several and like the look. I
couldn't
> >>find it in the archives. Has anyone on the list done this? The bed for
my
> 56
> >>is real ragged and I know I can get a late model bed. Appreciate the
help.
> >>
> >>
> >>
> >>L.R.Winters
> >>57 Daily driver
> >>56 "6 year project"
> >>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> Date: Tue, 13 Mar 2001 17:37:01 -0800
> From: "william moldenhauer" <wmh678@worldnet.att.net>
> Subject: Re: [oletrucks] 6 bolt wheels
>
> measure the bolt pattern to be sure
> Bill 53-3600 hot rod (project again)
> Channahon,Ill.
> website
> www.hotrodstogo.com
> Go ahead and take risks....just be sure that everything
> will turn out OK.
>
>
> - ----- Original Message -----
> From: kirk pierce <kpierce@charter.net>
> To: OleTrucks mailing List <oletrucks@autox.team.net>
> Sent: Sunday, March 11, 2001 12:33 PM
> Subject: [oletrucks] 6 bolt wheels
>
>
> > Will any of the new 6 bolt wheels fit on 55-59 chevy six lug axles? I
> have
> > noticed some newer (90's) Chevrolet trucks with 6 lug wheels and even
some
> > foreign vehicles like the Toyota SUV type trucks. Anyone tried this?
> All
> > help would be appreciated as I would like to put 16" or 17" wheels on my
> '57
> > but don't want to spend a bundle. Some "take-offs" would probably be
> > available at the custom wheel shops.
> >
> > Thanks,
> >
> > Kirk
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> ------------------------------
>
> End of oletrucks-digest V2 #1252
> ********************************
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|
