Hi Mark,
Although it isn't marked, I believe these particular bolts are grade 8, and
they require a 12 point socket to get a hold of them correctly. I have an
extra power steering box out in the garage and that is what I'm basing this on.
>I'm finishing up the installation of a '73 Cheyenne crossmember onto my '55
>1st. I want to take off the rag joint on the Cheyenne steering box.
>Problem, it has a weird pinch bolt in it, holding the rag joint to the
>steering shaft. it looks kinda like a Torx driver. Can any of you tell me
>what kind of bolt it is?
"Nothin lasts forever except old Fords and a natural stone" - Willie Nelson
http://home.utm.net/bfischer e-mail -->bfischer@utm.net
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|