Jim and all'
The best oil for 216-235s is 10w30 SJ. I'm sorry if my article was not
clear. If you go with 5w30 the volume of viscosity index improvers goes up
which leaves less room in the can for lubricating oil. Without looking in
my
references, there was an issue with excessive VI improvers doing something
under the extreme shear as the oil is rolled between crankshaft and bearing.
If you need more technical info, let me know and I'll look it up. Writing
technical articles for essentially non technical journals is a challenge, as
you don't want to lose the literate as well as the technically illiterate.
Bob ADler
>
> Well I got various messages, the one that I think I will try is switching
to
> 5-30 for the winter. In reading Bob ADlers messages on the Oil subject
and
> his article on Old Truck Mag I was under the impression that I needed to
> stick with straight 30 weight. Also the most important thing was the SJ
on
> the label. Is using 5-30 doing anything that is not desirable to the
motor?
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|