If you are talking about the lube in the steering box
(south end of the steering column) the proper lubricant
is GM part #1052182. Anything thinner tends to leak
past the seals in the box. Anything thicker (such as
wheel bearing grease) would not flow properly.
-----Original Message-----
From: John Howard [mailto:jdhoward@vianet.on.ca]
Sent: Tuesday, December 12, 2000 8:30 AM
To: oletrucks@autox.team.net
Subject: [oletrucks] grease
I would like to change the grease thats in the steering column
mechanism
it's caked in there, the operators manual states, remove cap on control box
and fill box with soft smooth grease....Do they mean like wheel bearing
grease.
thanks in advaance
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|