I used "American Designers Inc." under my truck behind the rear axle. Any
auto part store should be able to get them.
American designers ph. #1-800-628-5442 or 765-345-2127
See if they will send you a catalog, but do not tell them you are putting it
in an old truck cuz they will tell you they can get sued if it is not OE....
Shawn
>From: NTemple46@aol.com
>Reply-To: NTemple46@aol.com
>To: oletrucks@autox.team.net
>Subject: [oletrucks] Moving a gas tank/Fuel Pump
>Date: Fri, 8 Dec 2000 20:55:31 EST
>
>I would like to move the gas tank out from under my seat in my 46 2-ton.
>The only place to put it is between the rails at the back of the frame over
>the rear end since I have a two speed brownie and PTO box right behind the
>cab. Two questions. Do I need to get a stronger fuel pump to help get the
>gas up to the engine? It is probably about 12-14' from where the tank will
>sit to the current fuel pump location. (I will be installing a rebuilt 235
>this winter).
>
>Also, what should I do for a new gas tank on a very tight budget? The
>shape
>might require a custom fabrication due to clearances for the dump
>mechanisms,
>fill neck, etc. Any recommendations on places to get estimates, or should
>I
>have a local metal fabricator weld one up. Thanks in advance.
>
>Neil Temple
>46- 2-ton dump
>Arroyo Grande, CA
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
_____________________________________________________________________________________
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|