In a message dated 11/27/2000 5:35:11 PM Mountain Standard Time,
jhouse@ccsolution.com writes:
> One other problem. The bottom piece that holds the oil has a very small
> hole in it. It is about as big an if you would take a pencil and poke into
> where the lead stops. I am wondering what would be the best thing to use to
> fill this hole and also retain the oil in the bath.
>
>
Before I updated my drivetrain and eliminated the old air cleaner, I cleaned
and painted mine. I also found a small hole that had been dripping a lot of
oil for years. I was able to stop the leak with JB Weld, but I'd bet that
many products would work as well.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|