For NEW clutch head screws try this web site:
http://www.mrgusa.com/
Jim House
46 Chevy 3104
Hollis, NH
I still can not post to the list - I just get 2 copies of every message!
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Jon Kunkel
Sent: Saturday, November 11, 2000 12:02 PM
To: Deve Krehbiel
Cc: oletrucks@autox.team.net
Subject: Re: [oletrucks] Clutch Tip Screwdrivers
Deve,
I know they can be a pain in the A** to remove sometimes but they are almost
worth their weight in gold, as the supply dwindles, demand for some of the
list to keep it original with these items is becoming scarce.
I spent a few days in the junkyard removing the items I came for and in
addition I also removed as many of these clutch head screws as possible. I
now have a small coffee cans of clutch head screws that I have de-rusted,
cleaned and coated for use in a later project. And I have sent quite a few
sets to other people that wanted them for originality.
Just my 2 cents
Jon 50 3100
Chicago
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
----- Original Message -----
From: "Deve Krehbiel" <dkrehbiel@kscable.com>
To: "Brian _" <pkupman57@hotmail.com>; <jonkunkel@home.com>;
<chevy1@jps.net>
Cc: <oletrucks@autox.team.net>
Sent: Saturday, November 11, 2000 7:27 PM
Subject: Re: [oletrucks] Clutch Tip Screwdrivers
> If you have to mess with clutchheads, best thing to buy is a Makita
Grinder.
> These days I spend about three days a month in the salvage yard collecting
> parts for some of the retailers and I can tell you, when I see a clutch
> head, I try it with the screwdriver (out of habit and for no good reason)
> and then I grab the grinder and grind the head off. Its been my experience
> that even after spending the time drilling and re-tapping the hole, I
still
> could sip a few Pina Coladas, take a world tour, and then learn a new
> language in the time it would have taken for me to get it out with the
> screwdriver/visegrip/hacksaw combination that is the norm.
>
> Deve Krehbiel
> Hesston, Kansas
> 1950 3100 * 1949 3600 * 1948 4400 * 50 3100
> www.speedprint.com/Deves50/index.html
>
> ----- Original Message -----
> From: "Brian _" <pkupman57@hotmail.com>
> To: <jonkunkel@home.com>; <chevy1@jps.net>
> Cc: <oletrucks@autox.team.net>
> Sent: Friday, November 10, 2000 5:45 PM
> Subject: Re: [oletrucks] Clutch Tip Screwdrivers
>
>
> > if you really want clutch head screwdrivers go to NAPA the SMALL one
here
> in
> > town carries over 20 different size clutch head drivers, i bought
several
> > myself, then decided to go ahead and use allen heads, tho torx are
looking
> > good right now too.
> >
> > Brian M
> > Atwater, CA
> > '57 Chevy 3200
> > '55 Chevy 6400 (comming soon, very soon)
> > '00 Dodge Neon
> >
_________________________________________________________________________
> >
> >
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|