In a message dated 11/13/00 6:08:49 PM Central Standard Time,
mm@service-quality.com writes:
<< I have a '54 1/2 ton, the old wires are completely gone and I bought the
new set from Carters. Any tips and suggestions are appreciated. >>
Mike,
I did my '48 about 4 years ago, matter of fact, it was the first thing I
did to mine. I spent the weekend finishing, including turn signals. Follow
the directions carefully, one step at a time. (leave all the wire numbers on
until after everything checks OK) Double check all connections. The "smoke
check" after you're done is always a little scarey, but this is not rocket
science.
Mike Klepp
'48 3100
Wichita Falls, TX
http://www.geocities.com/mike_klepp/october_truckpage.html
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|