If this is done be carefull not to over heat it and temper the spring, under
the ball bearing
> -----Original Message-----
> From: Pastorjon994@cs.com [SMTP:Pastorjon994@cs.com]
> Sent: Sunday, November 12, 2000 9:43 AM
> To: JGWolford@aol.com; oletrucks@autox.team.net
> Subject: Re: [oletrucks] Re: oletrucks-digest V2 #1140
>
> Sometimes a propane torch on the end of a zerk will liquify any hardened
> grease and make the zerk usable again. Otherwise, zerks can be had at
> your
> FLAPS and are very inexpensive.
>
> Jon Callahan
> '50 3100
> Champaign/Urbana, Illinois
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|