What are you gapping the valve clearances at?
237459N@knotes.kodak.com wrote:
>
> From: W P. Fricke
>
> I wish you luck and would like to hear the outcome. I did an adjustment to
> my '53 this summer. It was noisy, otherwise ran well (very well). I warmed
> up the engine thorougly, running around town doing chores. I dove into the
> garage with it and had my son bump the engine. I went through each valve in
> the correct order according to specs. I remember one intake valve and one
> exhaust valve that were out of spec. I hoped those to be the causes of my
> clacking. I buttoned it up with a new cork gasket and ended up with
> basically the same performance as before: runs well but noisy. So what's
> the problem and whats the solution?
>
> Good luck and let us know how you make out.
>
> Patrick
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|