I have purchased a new vacume hose and connected this directly to my wiper
motor. Well I now understand that to operater the wiper I pull one lever
out and the wiper blade moves to the left, I push this lever in and the
wiper blade moves to the right. The second button can be rolled in or out
to control the force of the wiper movement.
Now my question.
The hose from the carb to the pipe into the truck is good and the connection
from this pipe to the vertical connection infront of the door is good.
However the hose from the door to the motor is shot. I can not reach the
connection to replace this hose, even with the wiper motor taken out. I do
not wish to remove the headliner and alot of other stuff to replace this
hose.
Is there a simple way to replace this hose?
Thanks,
Jim House
46 Chevy 3104
Hollis, NH
_________________________________________________________________________
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|