Mike,
I used the kit from Eastwood Co. They supply a chain which is what I used
to loosen all the remaining rust and debris. It did an excellent job. I
don't see a problem with the smooth pebbles except if they break up.
Jon 50 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
----- Original Message -----
From: <Mikerross@aol.com>
To: <ADvent@thuntek.net>
Cc: <oletrucks@autox.team.net>
Sent: Sunday, July 16, 2000 8:13 AM
Subject: [oletrucks] Gas Tank Coating
> Guys I am in the process of coating the inside of my trucks gas tank. I
was
> amazed at all the rust and junk that came out of the tank. Has anyone
used a
> gas tank coating? I ordered mine from Chevy Duty. Any "lessons learned"?
>
> It seems like I need to loosen the remaining rust and stuff in the tank
> before coating. I though about dropping a few handfuls of clean pebbles
into
> the tank and gently roll them back and forth hopefully loosening up the
rust
> and stuff.
>
> Any experiences you've had would be much appreciated.
>
> Thx.
>
> Mike
> '56 Chevy Truck
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|