Smokey,
I have the OEM AD tail lights and I have front and rear turn signals and
tail lights. The 3cp bulb is my tail and the 21cp is the brake/stop. I
routed the wires through the add on turn signal device and everything worked
fine. I also disconnected the front parking lights from the light switch
and connected them directly to the turn signal. Check your wiring.
> > I replaced the old heavy duty bumper on my truck, and because the tail
> > lights were mounted to the bumper, I bought the ones that attach to the
>rear
> > of the bed. They look great. Problem is that I can get a combination
>of
> > tail lights and brake lights, or tail lights and blinkers, but I can't
>seem
> > to get all three. Could it be that the bulbs (there are two per light)
>are
> > not the right kind for blinkers? Anyone else had to deal with this?
> >
> > Thanks-
> >
> > Smokey Culver
> > '50 3600 5-window (mine) & '56 3600 (hers)
> >
Durwood
51 1/2 ton 5 window
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|