Joe, I was considering using Comp Cams 280H magnum series (.480" lift) in the
motor I'm building.
What range (brand, model etc.) stall converter would you recommend? I've never
built a motor
radical enough to run anything but a stock converter, but figured this cam
might be a good
compromise between bottom end torque and top end power.
Wally
> I recommend the high stall converter for all the HP Engines I build for
> the light weight Street Rods I work on due to the vehicles tendency to lurch
> forward at stop signals and this lurching is a load on the engine that
> creates engine heat!
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|