Deve-
Its to adjust the alignment--castor I think (or is it camber??). I just
read about it in the shop manual at the end of the front suspension section.
I'm at the office now and don't have the shop manual. If noone else
responds, let me know this evening and I'll look it up for you.
Rich Gallagher
50 1 ton; 56 3200
----- Original Message -----
From: Deve Krehbiel <dkrehbiel@kscable.com>
To: Oletruck list <oletrucks@autox.team.net>
Sent: Monday, February 07, 2000 8:57 AM
Subject: [oletrucks] Front Spring Help Needed
> I am assembling my front end leaf springs (for my 50 3100) after taking
them
> completely apart for priming and painting. There is a shim that I assume
> goes between the axle and the leaf spring assembly. It looks like a very
> small leaf spring only fatter on one end than the other. The question is,
> does the fat side face the front of the vehicle or the rear? I have the
> factory assembly manual and its no help. Thanks!
>
> Deve
> 50 3100
>
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|