update: I just went to this site and it stated:
We apologize, but the Heavy Chevy Web Site is temporarily out of order.
Please contact us at
800-297-9694
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of REBUS-KNEBUS
Sent: Wednesday, January 26, 2000 12:09 AM
To: Deve Krehbiel
Cc: oletrucks@autox.team.net
Subject: Re: [oletrucks] rear end parts
Deve,
check out their web site: http://www.heavychevy.com
sorry I didn't put it in my response, I am on the road during the week so
their phone number isn't handy
Jon 50 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
----- Original Message -----
From: Deve Krehbiel <deve@wwwebservice.net>
To: rebus-knebus <rebus-knebus@email.msn.com>
Sent: Tuesday, January 25, 2000 8:51 AM
Subject: Re: [oletrucks] rear end parts
> Can you give me Heavy Chevys number?
> Thanks!
>
> Deve
>
> ----- Original Message -----
> From: rebus-knebus <rebus-knebus@email.msn.com>
> To: <Advdesign1@aol.com>
> Cc: <oletrucks@autox.team.net>
> Sent: Tuesday, January 25, 2000 8:23 AM
> Subject: RE: [oletrucks] rear end parts
>
>
> > I rebuilt my rearend in my 1950 3100, I replaced the vent with a new one
I
> > purchased at Heavy Chevy truck parts in Siloam Springs, AR. It was
easier
> > then trying to locate one that would properly fit. It saved me a lot of
> > time and frustration trying to find the correct one to replace the ole
> one,
> > and it is a metal unit, not a plastic one that I had found on a lot of
> > vehicles. Unfortunately here in Chicago there are not a lot of
junkyards
> > with older vehicles in them to try to salvage parts.
> >
> > Jon 50 3100
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >
> > -----Original Message-----
> > From: owner-oletrucks@autox.team.net
> > [mailto:owner-oletrucks@autox.team.net]On Behalf Of Advdesign1@aol.com
> > Sent: Saturday, January 08, 2000 5:26 AM
> > To: oletrucks@autox.team.net
> > Subject: Re: [oletrucks] rear end parts
> >
> > >
> > > For the vent , you should find one at a salvage yard that will
work,
> > they
> > > just press in,
> >
> > Newer ones press in, but older ones have pipe threads. Bring 7/16 open
> > wrench to remove a salvage unit.
> > Bob ADler
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >
> >
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|