In a message dated 11/20/99 5:14:56 PM Pacific Standard Time,
jmstreet@earthlink.net writes:
<< y 2nd question is
are the 2 cabs the same? Would my 55 front end match the 59 cab, if I
chose to use it? >>
I've got a 59 cab with 57 front sheet metal, using a 58 frame. The front of
the frame is longer, setting the bumper out a little bit (couple inches)
This could be easily fixed. The only problem using earlier front sheet metal
is the hood hinges have a different bolt spread on the firewall. The top
bolt lined up but you'll have to drill a new hole for the lower one.
Good Luck
Brian (akamf@aol.com)
55/2nd 3600
57-58-59 hybred 4x4
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|