I used the one the Chevy Duty sells and it works great. No the front whell
doesn't rub. It does require some welding and fabracation to get it all to
work. IT also requires that the shocks are reversed. Instead of pointing
forward they point backwards. You reverse the left & right lower ones and
re-mount the top ones. You would also need a couple of u-joint and a shaft
that does not come with the kit. You have to notch the inter fender to allow
the shat to pass through. All in all I am very happy with the setup. PLan on
it taking a weekend to get it installed and it is much easier if the front
end is removed.
----- Original Message -----
From: Joann Hughes <bubjo@injersey.com>
> can someone give me some detailed info on power steering conversions for
> a 1952 3100 with a V-8 ? i know about the kits available to install a
> 1973-
> 1978 truck steering box forward of the axle but will i have to modify
> the inner fender and will the tire rub the box? does the shock have to
> be relocated? is there anything else out there that will work without
> making alot of mods ???
>
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|