Bob,
I ended up drilling them out last night. I tapped the holes and made bolts
for them ( cut off the heads and slotted the tops). The frame cleaned up
nicely and got the first coat of paint. The original window popped right
out - I must be living right. Next project - electric wiper conversion!
Thanks all,
Dave Camp
49 3600
-----Original Message-----
From: Advdesign1@aol.com <Advdesign1@aol.com>
To: dpewter@email.msn.com <dpewter@email.msn.com>; nateley@email.msn.com
<nateley@email.msn.com>; oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Wednesday, August 11, 1999 8:56 PM
Subject: Re: [oletrucks] Window Glass
>
>
><< How do I get the
> >window frame apart? Are the two fasteners on the bottom screws or rivets
> and
> >what can I replace them with? >>
>
>they are called barrel nuts. both halves unscrew if you are lucky. If not
>drill them out and replace with pop rivets
>Bob ADler
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|