You might try Interstate Screw. Never used them, but they have quite a
product line listing and indicate that they stock clutch drive screws.
Good Luck! Here's their web address:
http://www.interstate-screw.com
Bill Simmeth
57 3200
> -----Original Message-----
> From: Paul W. Franchina [SMTP:pfoxtrot@gate.net]
> Sent: Wednesday, August 11, 1999 1:06 PM
> To: oletrucks
> Subject: [oletrucks] Clutch head screws
>
> Does anyone out there know of a source for the clutch head sheet metal
> screws that are used extensively in the Task Force trucks? I've talked
> to
> Chevy Duty who sells lots of clutch head stuff but just about all of
> them
> are machine screws. Most of what I'm after tend to be #10 or #12 pan
> head
> types about 1" or less long. Most of what I have are pretty rusted.
> I've
> blasted some and used POR15 to paint the heads, but it's a pain
> because you
> have to go in and touch up the clutch head recess after installation
> because you invariably break/chip the paint putting them in.
>
>
> Paul W. Franchina
> pfoxtrot@gate.net
> & Boris: 1958 Chevrolet Apache 3100 Stepside
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|