<< Where does the
"return" line connect to the canister? The only other possible connection I
can find is the drain plug on the bottom - surely not there?
See if the bottom hole actually goes up the center tube to a pinhole half way
up. that would make the can botom half a sediment area.
2. Should the filter unit be mounted ahead or behind the carbie?
ahead
3. Any ideas about the best way to winkle the bung out of the block?
I hate to use an easy out!
>>
(a) try vise grips
(b) weld nut on stub and unscrew. Easier if you use an unplated nut.
(c) if you have to drill put a blob of grease on bit so chips stick and don't
fall into pan
bob ADler
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|