I have seen various motors with an external line plumbed for oil to the
rockers. I just recently pulled a valve cover off of a 59 at the boneyard
which had this connection in place. I'm wondering if there would be any
benefit to doing this.
> -----Original Message-----
> From: Grant Galbraith [mailto:trks@javanet.com]
> Sent: Wednesday, July 07, 1999 7:46 PM
> To: MIKE RAHL
> Cc: Hudson29@aol.com; oletrucks@autox.team.net
> Subject: Re: [oletrucks] Fram Questions
>
>
> On the later engines oil is delivered to the top via the
> lifter galley. Using
> solid lifters with no relief for this passage will shut off
> oil to the top end.
>
> Grant 50 3100
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|