Check with an air freight company - If the fender can be lashed to a pallet,
they should be able to send it for much less than those prices. I sent a
rear axle, torque tube attached, from FL to NM for about $80.
Jack / Winter Park FL
----- Original Message -----
From: Marlene Rzepkowski <mrzepkow@rochester.rr.com>
To: 'oletrucks' <oletrucks@autox.team.net>
Sent: Sunday, June 27, 1999 11:37 PM
Subject: [oletrucks] Shipping a fender
> A fellow lister and I are trying to get a front fender from one to the
> other. He is in Montana and I am in Rochester NY. The fender was
reasonable
> but the cost of shipping from places that he has found is almost three
times
> the cost of the fender. UPS and FED X is around $150 but they have issues
> and would probably not do it. A moving van line would cost $441 and an
> airline would charge $203.
> We need help from any of you listers out there that would have a
suggestion
> or something that they have tried . If you think this info would be of
help
> to all then please post response to list but if not then please notify me
> off list.
>
> TIA,
> Marlene
> '59 Apache 1 Ton
>
>
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|