In a message dated 4/30/99 10:27:06 AM Pacific Daylight Time,
VIKINGHILL@aol.com writes:
<< Hey everyone,
I don't always mean to be a taker, but here is yet another question /
obsevation for the group:
When I make a hard stop in the '47-2 it idles down and goes dead. I've
adjusted the mixture screws and that has helped, but I'm close to having it
too reved during idle. No leaks that I can determine, FINALLY. I hope that
it is something simple, the gas filter isn't plugged up, but it isn't new.
I've just put a new paper filter on the breather. I've looked at the plugs
and have cleaned them. Any suggestions as to what I should do next?
Here are the stats:
the engine is a '53 235. I've a rochester 1bbl.
the drive line is stock. The engine was rebuilt in 1980 but probably only
has <10,000 miles on it. (It sat alot.) I'm stumped....
Thanks in AD vance.
Casey
'47-2 Thriftmaster 3100
P.S. Any one know the proper timming , spark and point gappage for the '53
235 ci.?
TI >>
I'd recheck the float level.
Mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|