You can find information for TIP blasters at www.tiptools.com or call
1-800-321-9260 for a catalog (I think they are free).
I got the 99-C pressure blaster that says it needs 7-15 cfm @ 80 PSI. I
have a 80 gallon, 7.5 HP Campbell Hausfeld compressor rated at 17 cfm @
90 PSI which does a decent job of keeping up with the blaster. This is
using a 3/32 inch tip. As the tip get worn, I have to stop about every
ten minutes to let the compressor catch up (or change the tip).
Dave
1950 3100
On Sat, 17 Apr 1999 09:55:48 -0700 Gary Stutz <gary@mx.serv.net> writes:
>W&D wrote:
>>
>> I'm considering the purchase of a pressure sandblaster such as those
>offered
>> by Eastwood or Tip.
>> Any comments, advise or criticism will be appreciated.
>>
>> Thanks in advance.
>>
>> Whitney H
>>
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and
>1959
>Whitney-
>
>I'm going to be buying a compressor and am looking for a sandblasting
>setup. Could you send info on the Eastwood and Tip stuff? Also, which
>compressor are you using?
>
>TIA
>Gary Stutz
>56 panel
>57GMC panel
>oletrucks is devoted to Chevy and GM trucks built between 1941 and
>1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|