I bought three used brackets from Jim Carter's about two years ago. No
cracks, a little surface rust, generally in good shape (and much better
than none at all which was my original configuration.) And to confirm
what Bob mentions below, the two front brackets are different from the
rear four. Make sure you specify which ones you need.
Jeff Nelson
Paducah, KY
1953 3600
> ----------
> From: Advdesign1@aol.com[SMTP:Advdesign1@aol.com]
> Reply To: Advdesign1@aol.com
> Sent: Sunday, March 07, 1999 8:27 PM
> To: reidx4@gte.net; oletrucks@autox.team.net
> Subject: Re: [oletrucks] running board brackets
>
> In a message dated 03/07/99 03:07:22 PM Eastern Standard Time,
> reidx4@gte.net
> writes:
>
> <<
> Does anyone know if there are any vendors who carry running board
> brackets for AD trucks or are these a wrecking yard item. I'm not
> referring to the small brackets spot welded to the runnung boards,
> but
> the big ones rivited to the frame. I have one thats bent. TIA
> >>
> Salvage yard only. Watch out for small cracks near the rivets to
> frame. I
> believe 4 of the 6 have the same part number. If my memory is
> correct, the
> front 2 are longer than the rear 4, but they interchange side to side.
> Bob ADler
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|