Hi Peter,
Who did the installation, how much did it cost, and how long did it take? Do
you have contact info?
Michael 64 TR4
----- Original Message -----
From: "Peter & Nancy Bergman" <BergmanIns@comcast.net>
To: "North Bay British Car Club" <nobbc@autox.team.net>
Sent: Wednesday, November 17, 2010 11:16 AM
Subject: Re: [Nobbc] TR4A Parts
> Hi, I did the HVDA (Herman van den Akker) conversion, and it was truly
> seamless. Everything fit, even the TR4A flywheel takes the new clutch, no
> drilling required. The car is completely transformed, completely relaxed
> at highway speeds (whatever they are, haven't recalibrated the speedo
> yet), with no rattles and no boat anchor hanging off the back end of the
> trans as on the old TR tranny. The only thing that requires some close
> measurements is the installation of the hydraulic throwout bearing, to be
> sure you don't overextend it. I would highly recommend the conversion,
> and Herman is very helpful, if you have any questions along the way. Feel
> free to ask me any questions.
>
> Pete Bergman
> (408) 773-1781
> '67 TR4A
> '54 JagXK120
> ----- Original Message -----
> From: "G. Mugele" <mewgull@sonic.net>
> To: "North Bay British Car Club" <nobbc@autox.team.net>
> Sent: Monday, November 15, 2010 11:31 AM
> Subject: [Nobbc] TR4A Parts
>
>
>> Wow! You guys are terrific!
>>
>> I was amazed at all the sources you all know.
>>
>> Thanks ever so....
>>
>> I have just order the e-brake assembly from Team Triumph. They're in
>> Warren, Ohio so it will be some time before I know for certain how
>> happy I am with what they're selling but it seems to be exactly what I
>> need.
>>
>> Thanks again, to all who offered suggestions.
>>
>> On another front: There is clearly a problem with the clutch which I
>> found soon after setting off from Colorado. It seems to be binary,
>> fulling engaged or fully disengaged. The problem source seems to be a
>> lack of lubricant on the splines causing it to bind on something.
>> Since any fix is going to involve pulling the gearbox and since I'm
>> not sure how good the box really is, I'm considering getting one of
>> those VERY expensive conversion kits and installing a toyota 5-
>> speed. What I've learned about this is that it's a seemless (more or
>> less) conversion and that the 5th OD gives the TR reasonable highway
>> speeds without forcing the tach needle to twist to the right
>> excessively. Has anyone here done anything like that and if so what
>> was the result? Other opinions sought, if anyone has any strong
>> feelings one way or another.
>>
>> Yes I know that it will take away from the originality of the car but
>> it's not particularly egregious. I found some photos of a TR4 with
>> the conversion and it looks totally stock.... at least a glance. And
>> heck... I'm gonna stick on a spin-off filter and maybe go to a
>> pertronix distributor.... so.... well.... she is a little long in
>> the tooth.
>>
>> Gerry
>>
>> G. Mugele
>> mewgull@mugele.net
>>
>> *** The world is made for people who aren't cursed with self
>> awareness. -- Annie Savoy
>> _______________________________________________
>> Nobbc@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $11.47
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/nobbc/bergmanins@comcast.net
> _______________________________________________
> Nobbc@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/nobbc/mvg1@att.net
_______________________________________________
Nobbc@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|