Thank you all for your reposonses/ I went to my local spares place in a
back street in Salisbury who could not supply a 13.5mm would 13.49mm do? It
turns out it was a 1/4 Whitworth which he had in stock and which did the job
in seconds. Ujs replaced and car transformed.
Richard, yes I do have an alternator. Musgrove shows a '69 4/4 having a
dynamo and a '75 having the option of dynamo or alternator
regards
Mike
----- Original Message -----
From: <RCooperman@aol.com>
To: <mike.dixon@virgin.net>; <morgans@autox.team.net>
Sent: Tuesday, May 08, 2001 8:53 PM
Subject: Re: Prop Shaft Bolts
> Mike,
>
> Whitworth, likely they are Whitworth bolts. Every odd bolt in my '69 4/4
is
> Whitworth.
>
> Richard
> '69 4/4
>
> In a message dated 5/8/2001 3:48:46 PM Eastern Daylight Time,
> mike.dixon@virgin.net writes:
>
> << I have traced the vibration in my '71 4/4 to a very worn UJ on the diff
end
> of the propshaft. Next problem is how to undo the 4 bolts. They are not
> 1/2 in or 9/16 - nearer 17/16ths or 13.5mm! Any ideas what they might be
> and how I might shift them?
>
> Any other hints/tips concerning this taskette would be very gratefully
> received!
> thanks >>
///
/// morgans@autox.team.net mailing list
///
|