morgans
[Top] [All Lists]

RE: Louvers in the Bonnet

To: "'Vandergraaf, Chuck'" <vandergraaft@aecl.ca>,
Subject: RE: Louvers in the Bonnet
From: "Willburn, Gerry" <gerry.Willburn@vcincorp.com>
Date: Thu, 1 Jun 2000 11:32:00 -0700
Actually the 4/4s and Plus 4 drophead coupes do not have louvers.

Gerry


> -----Original Message-----
> From: Vandergraaf, Chuck [SMTP:vandergraaft@aecl.ca]
> Sent: Thursday, June 01, 2000 10:38 AM
> To:   'David McCoy'
> Cc:   morgans@autox.team.net
> Subject:      RE: Louvers in the Bonnet
> 
> Dave,
> 
> Wait no longer; see my e-mail dated yesterday, copied below:
> 
> Len,
> 
> Not just the +8, but also the 4/4 and the +4 (but, apparently not the new
> Aero 8) have louvres.  I'm not an engineer (aerospace or otherwise) but I
> suspect that, when the car is in forward motion, the louvres force the air
> rushing over the bonnet away from the bonnet and create a partial vacuum
> to
> help suck the air out.  The only other way for air to escape is through
> the
> bottom of the engine compartment.  I agree, the louvres look cool but are
> hard on the finger tips when polishing the car. But, "no pain, no gain."
> 
> Chuck Vandergraaf 
> Pinawa, MB
> '52 +4 (complete with louvres)
> 
> 
> Chuck (radiochemistry; not physics)
>       ----------
>       From:  David McCoy[SMTP:gdm_1419@yahoo.com]
>       Sent:  Thursday June 01, 2000 11:57 AM
>       To:  morgans@autox.team.net
>       Subject:  Re: Louvers in the Bonnet
> 
> 
>       --- "Michael D. Miles, PE" <mdmiles@mdmpe.com> wrote:
>       > Not exactly.  The theory is that a certain amount of
>       > air enters the
>       > GRILL but its 'path of least resistance' is actually
>       > downward through
>       > the opening to the ground between the grill and
>       > radiator.  This
>       > reduces the amount of air rammed through the
>       > radiator signifigantly
>       > and therefor allows backflow (recirculation) from
>       > the engine
>       > compartment to percolate forward through some of the
>       > radiator, thereby
>       > reducing its efficiency in removing heat.
> 
> 
> 
>       Waiting patiently for "bernouli" to surface...IR
>       airflow over and across louvers pulling air from
>       engine area... OR perhaps louver as "wing" ....
> 
>       Dave (C in physics) McCoy
> 
> 
>       __________________________________________________
>       Send instant messages & get email alerts with Yahoo! Messenger.
>       

<Prev in Thread] Current Thread [Next in Thread>