Something is funny about that Morgan as all Morgans after 1960 were standard
with disc brakes on the front. It is very possible to machine brake drums
" out of round" if the machinist is not carefull.
Regards,
Greg Solow
----- Original Message -----
From: Terry Dowling <tdowling@gesb.wa.gov.au>
To: <morgans@autox.team.net>
Sent: Wednesday, January 12, 2000 11:54 PM
> Dear Morganeers,
>
> I am in the process of looking at an early 60s +4 and have had a
> rpe-purchase check that has revealed that the brake drums seem to be
> freshly machined, yet there is a serious shudder and pulsating when
> applying the brakes. The car has four-wheel drums.
>
> I've read a few list items on spindles bending and was wondering if that
> may be the cause.
>
> Any tips greatly appreciated.
>
> Cheers,
> Terry
>
>
>
> ========================================================
> Standard disclaimer:
> Any recipient of this communication acknowledges that:
> * the Government Employees Superannuation Board accepts no responsibility
for the contents nor the validity of this communication; and
> * they do not rely on any view given unless it is properly authorised. In
the case of the Year 2000 issue, there appear to be no Y2K concerns at this
time and the GESB is operating normally.
> ========================================================
>
>
|