This is a multi-part message in MIME format.
--------------3EBF38563E07
ED,
Also try The Roadster Factory, Moss Motors and Victoria British. After
all it is TR3.
Tony Souza
--------------3EBF38563E07
Content-Disposition: inline
Received: from triumph.cs.utah.edu (triumph.cs.utah.edu [155.99.188.52])
by pear.epix.net (8.9.3/8.9.3/1999080701/PL) with ESMTP id OAA12197
for <tjsouz@epix.net>; Thu, 16 Sep 1999 14:35:54 -0400 (EDT)
Received: (from majordom@localhost)
by triumph.cs.utah.edu (8.9.1/8.9.1) id MAA21783
for morgans-actors; Thu, 16 Sep 1999 12:23:34 -0600 (MDT)
Message-Id: <1D40B685B588D21190470000D11BAFD4018DC987@mbsp02.sp.TRW.COM>
From: Gerry Willburn <Gerry.Willburn@trw.com>
To: jblair@exis.net, edherman@concentric.net, morgans@autox.team.net
Subject: RE: +4 Starters
Date: Thu, 16 Sep 1999 11:22:42 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2448.0)
Sender: owner-morgans@autox.team.net
Precedence: bulk
Reply-To: Gerry Willburn <Gerry.Willburn@trw.com>
Ed,
If you have the bullet nosed starter, and you hear it turning but with no
engagement, the problem is the rubber bushed dog that connects the starter
shaft to the gear mechanism. This is the most common problem with these
starters. the rubber vulcanizing breaks down and disconnects from the
shaft. Replacement is not too difficult if you can find the part. Linda, at
MORGAN SPARES or Melvyn Rutter should be able to supply one.
Gerry
> -----Original Message-----
> From: John T. Blair [SMTP:jblair@exis.net]
> Sent: Wednesday, September 15, 1999 2:51 PM
> To: edherman@concentric.net; morgans@autox.team.net
> Subject: +4 Starters
>
> At 02:20 PM 9/15/99 -0400, ed herman wrote:
>
> >I've got the bullet nose type, and the "clutch is not engaging" according
> >to the locals.
>
>
> Ed,
>
> You say the "clutch is NOT engaging". When you hit the ign. switch,
> do you hear the starter spin up, but it doesn't crank then eng?
>
>
--------------3EBF38563E07--
|