The tunnel is only screwed down to the wood of the floorboards of the car.
Normally there is more than adequete room between the tunnel and the
accelerator pedal and brake pedal. A previous person working onthe car may
have remounted the tunnel in the wrong location, to far in the direction of
the pedals. It is a simple matter to move the tunnel back to the center of
the car or even farther if that is what you need. Just make sure that you
will still have access to the lube fitting on the top of the bell housing
for the
T/O bearing.
Regards, Greg Solow
-----Original Message-----
From: Brickey, Peter <peter.brickey@compaq.com>
To: 'morgans@autox.team.net' <morgans@autox.team.net>
Date: Friday, July 02, 1999 8:05 AM
Subject: Spacing between brake pedal and tunnel
>Hi,
>
> I have a 1964 +4 and it seems that the brake pedal is too
> close to the tunnel as my right foot (not that I have big feet)
> has a problem fitting between the brake pedal and tunnel to
> access the accelerator pedal. Is there any way to correct this
> other than putting a big dent in the tunnel?
>
> Thanks,
> Peter
>
|