John T. Blair wrote:
>
> There is an aluminumn cap strips that cover the sean between the rear
> deck and the side panels on the Morgans. I believe they are about 3/4"
> wide. I picked up some new one years ago. However, during reassembly,
> the rear of my car seems to have gotten about 1/4" to 1/2" wider. So
> the 3/4" cap strips don't completely cover the seam and nails/screws.
>
> I've dried EPC INT. INC. (one of the suppliers I recommend on the Web
> page), but he doesn't have anything quite that wide.
>
> I was wondering if anyone has found a source for these cap strips that
> might be 7/8" to 1" wide?
>
> John
>
> John T. Blair WA4OHZ email: jblair@exis.net
> Va. Beach, Va Phone: (757) 495-8229
>
> 48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V
> 75 Bricklin SV1 77 Spitfire
Hi John,
McMaster-Carr sells aluminum "half oval" mouldings. I used the 1" size
on my '36 4-4. Their part No. is 8124D15 with holes and 8124D16 without
holes. It comes in 12 foot lengths.
Regards, Tony Souza W3HMU
|