To: | ebrown@ms.com |
---|---|
Subject: | Re: Damper Blades-What For And How Do You (Ah) Test Them? |
From: | "Warden, Tom" <twarden@usia.gov> |
Date: | Thu, 9 Oct 1997 10:05:08 -0400 |
It is actually the damper blade shims that may need attention. The first thing to do is grab hold of the damper blade and give it a good shake. If there is any play the shims need to be adjusted. The shims are located on either side of the blade where it mounts to the chassis. Simply loosen the mounting bolts and push the shim in toward the blade then retighten. Do one bolt at a time so you don't push the blade and other shim in the other direction. Good luck -- There has been volumes written about correcting wheel shimmy. I hope this simple suggestion may help. Tom Warden 1965 4/4 |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Damper Blades-What For And How Do You (Ah) Test Them?, ebrown |
---|---|
Next by Date: | Re: Damper Blades-What For And How Do You (Ah) Test Them?, Joseph DeLuca |
Previous by Thread: | Damper Blades-What For And How Do You (Ah) Test Them?, ebrown |
Next by Thread: | Re: Damper Blades-What For And How Do You (Ah) Test Them?, Joseph DeLuca |
Indexes: | [Date] [Thread] [Top] [All Lists] |