At 08:01 PM 7/6/97 -0700, George Gerth wrote:
>......
>Now upon looking closer at the right front rotor, I see that it is a
>substitute for the original. It is the proper diameter and offset, but
>is measurably thinner than the other side. It also had four mounting
>holes originally which were braised up and 5 holes drilled to mount up
>to the Morgan knock off hub.
>
>I'd like to get an original rotor. Any thoughts as to what I can match
>it to?
George,
The only thought I have on the subject is:
Does you caliper have a "14" stamped on the outboard side? If so,
that caliper was used on the 59-63ish Austin Healeys. You might try
Healey Surgeons Inc. They have caliper rebuild kits
7211 Carroll Ave. "HYD 017"for $30 (does both calipers)
Tokoma Park, Md. 20912 and pistons @ $32 ea. Haven't done
(301) 270-8811 business with them yet
Let me know what you find out.
John
John T. Blair WA4OHZ email: jblair@exis.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V
75 Bricklin SV1 77 Spitfire
|