morgans
[Top] [All Lists]

Air Filter

To: morgans@autox.team.net
Subject: Air Filter
From: NKED65A@prodigy.com ( BOB NOGUEIRA)
Date: 09 Sep 96
-- [ From: Bob Nogueira * EMC.Ver #2.5.1 ] --

Hey I didn't die. I just happened to have had a LUCAS kind of August.
Won't b6ore you with the details . 
Wading through my 800 pieces of Email ( ever notice how email is like
that voltage regulator n the garage that doesn't work but you just can't
throw it out because " there may be something in there I can someday use
?")
Anyway I saw a posting re; the wedge air filter on the Big Morgans  and
how much clearance was needed .
Well since I've been out there putting my car back together after my
"ONE WEEK of HEAT and panel replacement back in July , I took some
mesurements for those interested.
First of all when I but the air filter on the car I had to remove the
insulation blocks between the carb and manifold. Second my+ 4 has CD
175s not the SU,
+
Placing a bolt in the air filter hole on the carb and pushing it out
until it hit the bonnet I found 1 3/4/ inches of clearance.
Placing a straight edge between the Bonnet Stop and the front latch hook
( mounted to the fender ) I found 3/4  inch between the straight edge
and the part of the carb which would fit the tightest (  the leading
edge of the air filter mounting flange).

My Box ( Factory ) fits in this space very nicely Thank you .

Remember I don't have the blocks behind the carbs, but have never
noticed a   problem.

Well back to reading my mail

Bob Nogueira    -  If I could figure  out how to convert from doing time
over runs to doing cost over runs I be a natural for the Pentagon-

<Prev in Thread] Current Thread [Next in Thread>
  • Air Filter, BOB NOGUEIRA <=