correct... but don't be scared to experiment...the front port on the rabbit
M/C normally goes to the rear of the vehicle (drums) and the rear port goes
to the front and we hooked ours up the same way.
We didn't need a proportioning valve because all tires locked up as per the
test. We did have to experiment on the pedal ratio (length) for it to work
though (~8:1) which made for a fairly long pedal. This was due to the ratio
of the hydraulic advantage of the M/C vs the caliper piston volume (not the
best like the $$$$ wilwoods).
Believe me it was effective and cheap!!!
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mini-baja
|