According to the parts lists the only different discs and hubs were between
the 4-cylinder and V8 cars. There's not much difference in the latter as
the V8 hubs were used on 4-cylinder cars for the 77 and later model years,
and the same disc seems to have been used with both hubs when on a
4-cylinder. If my old discs were in this garage I could measure them, but
they're not so I can't.
PaulH.
----- Original Message -----
> He bought new brake rotors and he tells me the hole in the center for the
> hub is not large enough to go onto the hub.
> He says the hole in the rotor is 2.85" and the hub is 2.95" Not quite
> 1/8"
> inch too small.
> I always thought that B rotors were a case of buy one fits all.
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|