I WAS just gonna reply to David but realized there
is info in the reply that might assist all of you, so
HERE !!!
<< Maybe I'll still go TP but delivery will be slow, probably a
couple of weeks, >>
Mine come UPS and in 2 - 3 days, David. And TRUST
me on this, for what you will be doing AT at a LOW
pressure [20 -30 psi or less] Skat-Blast will MORE
then outlast just the current project. Just a a note,
after a couple minutes of 'blasting' take the item
out of the box and inspect for 'pitting'. SHOULD be
NONE!!
Even when 'busy' I would guesstimate a MAX of
starting a 2nd 50# bag per year.
Seriously, I can do a "B" Valve Cover, rinse with "Busty"
Brake Cleaner [or laq. thinner] and 'finish paint' right
out of cabinet !!
<VBG>
I have a couple items hanging from ceiling in Front Shop
and I will try in next few day to get you [and List] some
close-up pics and put-up on my site for all. I am fairly
certain that the 948cc Frogeye Oil Pan has been hanging
for five [5] years 'outta-da-box' and still has ZERO
[even surface] rust !! A VERY good thing <G> !!!
And for all of you with either home-built or H.F. 'level'
of boxes I will also try to get some pics of how I added
a second INSIDE light to my TipTools 5 FOOT cabinet.
Would also apply to even just a FIRST light<G> !!
Ya'll should also search the AutoX Spridgets Archives
for HOW to set-up a shop-vac for these types of
cabinets. Make your life WAY easier !!!! er, dat's just
ONE of the reasons to pop for real McCoy and NOT
the H.F. cheapies <VBG> !!!
Ed
Please visit MY site at:
www.justbrits.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|