If you remove the right-angle drive you really should fit a slightly longer
cable to increase the radius of the curve that has been introduced.
Right-angle drives *are* 1:1, and their output is in the same direction as
the input. LHD cars had two of these drives - one at either end, RHD cars
only had one.
PaulH.
----- Original Message -----
> .. I wound up taking the 90 degree drive off and running
> the cable directly into the transmission, my question is , will I be
> looking
> for problems (short life span ) on my new cable because I took the 90
> degree
> drive off?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|