::: Shrug:::
If you use speedbleeders, and non-silicone fluid, you will want to have a
hose and bottle to catch the fluid so that you don't wind up stripping the
paint off of what the fluid hits.
If you are using a hose and a bottle, all you have to do it have the hose
run upward a bit, and the fluid in the hose preforms the same function as
the speedbleeder.
So what is the purpose of / need for the speedbleeders again?
Rick
On Jan 11, 2008 5:06 AM, oliver <sumton@sbcglobal.net> wrote:
> speedbleeders are absolutely the way to go!!!!!
>
> >I recommend investing in some speedbleeders. They are one way valve
> > bleeders that make it very easy to bleed brakes with one person. They
> are
> > generally available in auto parts stores or on line from the
> manufacturer.
> > I just used them to completely rebuild my MGB and I would never go back
> to
> > the original bleeders.www.speedbleeder.com
> > Ron
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
>
> You are subscribed as richard.ewald@gmail.com
>
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|