Yes! Been tere, done that.
Before you route the cable through the firewall,
thread a deep socket onto the cable. It will give you
enough leverage (and something to grab) to tighten the
nut nicely. Once the socket is removed and everything
is in place and straight, use a mirror and paint a
glob of fingernail polish or model car paint between
the nut and the threads to "lock" the nut from
vibration.
regards,
rick
--- 1971-red-mgb <1971mgb@cox.net> wrote:
> has anyone figured out an easy way to install the
> complete choke cable on the
> B, I've skinned my had over and over trying to
> tighten the nut under neat the
> dash, maybe get a friend with small hands to do it?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
>
> You are subscribed as rolindsay@yahoo.com
>
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|