mgs
[Top] [All Lists]

Re: [Mgs] Alternator

To: Max Heim <max_heim@sbcglobal.net>
Subject: Re: [Mgs] Alternator
From: Paul Root <ptrmgb@gmail.com>
Date: Thu, 4 Oct 2007 20:11:28 -0500
We have a winner.

It is a press fit. It just didn't look like it because the quick  
paint job they did on
it.

Thanks, Max!


On Oct 4, 2007, at 6:03 PM, Max Heim wrote:

> All of those that I have ever encountered were just press fits.  
> Just lean on
> it a bit with a clamp, bench vise or BFH and it should assume the  
> correct
> position.
>
>
> --
>
> Max Heim
> '66 MGB GHN3L76149
> If you're near Mountain View, CA,
> it's the primer red one with chrome wires
>
>
> on 10/4/07 3:58 PM, Paul Root at ptrmgb@gmail.com wrote:
>
>> Here's a picture.
>>
>> http://www.joshsjottings.com/~ptroot/PA040007.JPG
>>
>> The green one is the new one with the stand-off going the wrong way.
>>
>> Oh, and I tried moving the rear bracket back further, it won't go
>> back far enough.
>>
>> On Oct 4, 2007, at 5:31 PM, Paul Root wrote:
>>
>>> So the alternator from the local supply store came in finally. It
>>> wasn't the cheaper of the
>>> two choices. That was unavailable. But this was only $90.
>>>
>>> Anyway, I've got two problems.
>>>
>>> 1. I don't have the little key for locking the chuck to the pulley.
>>> I don't remember taking one out, of
>>> either alternator. And I can't find them.
>>>
>>> 2. It won't go on.  The back mount point has a stand off, like the
>>> original. Except the original is
>>> on the inside of the bracket. This one is on the backside of the
>>> bracket so it doesn't allow the alternator
>>> back far enough for the front bracket to meet up with the mount
>>> point, and the pivot arm doesn't meet
>>> up either.
>>>
>>> I've already called Quality Coaches,  Mark has one. I was going to
>>> get as a spare. I can get some keys
>>> for the chuck while I'm at it. I was going to get the second one
>>> from him anyway, to have a spare. But
>>> I thought this would be quicker, since getting to South MPLS is a
>>> bit of a pain with the 35W bridge out.
>>>
>>>
>>> Can I hack saw the stand-off off? Or is that structural in some way.
>>>
>>> Paul Root
>>> ptrmgb@gmail.com
>>> 77 MGB
>>> 99 OBS
>>>
>>>
>>>
>>
>> Paul Root
>> ptrmgb@gmail.com
>> 77 MGB
>> 99 OBS
> _______________________________________________
> ptrmgb@gmail.com
>
> Edit your replies
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs

Paul Root
ptrmgb@gmail.com
77 MGB
99 OBS
_______________________________________________

Edit your replies

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

<Prev in Thread] Current Thread [Next in Thread>