Sorry Hans, forgot the reply feature doesn't work on this list.
---------- Forwarded message ----------
From: Steve <temporarilyoffline@gmail.com>
Date: Jul 11, 2007 9:41 AM
Subject: Re: [Mgs] i think i know what to do
To: Hans Duinhoven <h.duinhoven@planet.nl>
I have this problem and I can't get the old fuse block off the car since the
screw head is stripped... any ideas? The 'socket' is too narrow to fit in a
set of vice grips or to cut a slot in the screw.
- Steve
On 7/11/07, Hans Duinhoven <h.duinhoven@planet.nl> wrote:
>
> Also check, if the fuseblock contacts do not have bad rivet fittings.
> If so, replace fuse block.
>
> Cheers,
>
> Hans
>
> 1971 BGT
>
> ----- Original Message -----
> From: "Bill Miller (LBCs)" < lbcs@embarqmail.com>
> To: "'oliver'" <sumton@sbcglobal.net>
> Cc: <mgs@Autox.Team.Net >
> Sent: Wednesday, July 11, 2007 2:03 PM
> Subject: Re: [Mgs] i think i know what to do
>
>
> > Check the fuseblock.
> > Those all run to the same fuse.
> > I had the same problem. Everytime I hit a bump in the road they would
> > either go on or off. Cleaned the fuse block, tightened the clips and
> > Everything is fine now.
> >
> > -----Original Message-----
> > tonight i filled up and it still read dead zero as opposed to just being
>
> > pessimistic
> >
> > on the way back i realized i had no tail lights or dash lights. ok.
> > btdt.
> > pull the light switch, futz with it, put it back in, usually fixes it.
> > not
> > tonight. brake light works one side only, but that's been that way for
> a
> > while. i think thats unrelated.
> >
> > switching in and out of overdrive at one point, which i think was a
> > coincidence, the missing lights shine on and work all the way home.
> _______________________________________________
> temporarilyoffline@gmail.com
>
> Edit your replies
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|