I painstakingly rebuilt the Master Cylinder following exact pictures,
diagrams, and how the previous one was built. I am fairly certain I rebuilt
it correctly.
I will test the rear circuit output to see if the MC is pumping anything at
all out into the line.
I will also check the rubber hose at the rear T split out to the rear brakes
to see if it is faulty.
I did not rebuild the rear brake cylinders. I was hoping to get the front
brakes rebuilt and working and then focus on the rear brakes at a later
date.
Thanks to everyone for your responses!
Did anyone check out the before and after pics?
-----Original Message-----
From: David Lieb [mailto:dbl@chicagolandmgclub.com]
Sent: Saturday, October 07, 2006 4:50 PM
To: John Roberts
Subject: Re: Brake Trouble!!
John,
There is a rubber hose from the back of the tunnel to the differential. That
is what Kevin was talking about. It is also possible that the half of the MC
that runs the rear brakes is not working. Are you SURE the pin is in there
correctly? These things have a reputation for being a bear to rebuild. Try
bleeding it at the MC to see if anything is coming out of the circuit to the
rear brakes. Just be careful not to spray fluid over everything.
David
|