I have a strip of foam under the vinyl along the front bow but still get
water in (air doesnt seem to be a problem) I also have the center clip
(these are available to retrofit to a 1500 top).
When going on long trips and rain is expected I usually run a strip of
Masking tape (the new clear tape) along the front of the windscreen covering
the flap and the screen - this works like a charm :)
Rick
Webmaster for:
___________________________________________________________
http://www.mgcars.org.uk/namgbr - The North American MGB Register
http://www.mgcars.org.uk/mgcouncil - North American Council of MG
Registers
http://www.britishcarclub.net - The Suncoast Classic MG Club and Nature
Coast British Car Club
----- Original Message -----
From: "Tom Gunderson" <Thgun@comporium.net>
To: <mgs@autox.team.net>
Sent: Tuesday, January 03, 2006 18:05
Subject: MGA RAG TOP air leak
>I have a new top on my 57 roadster. It looks great. I need some information
>on
> how to keep the air from comming in under the bow. I do not have the
> clips
> that lock down the bow in the middle. Is there a need to put foam or a
> soft
> strip across the bow to help seal the windshield to the bow.
> Thanks,
> Tom Gunderson
> 1957 mga 1500
|