Phil,
Yes, just wrap notes in a couple of sheets of paper and mail. Don't forget
a sheet with your address and what you want!
At 09:21 AM 6/1/05, you wrote:
>Barrie,
>
>No, you did not, however now that you have them I will send money for an
>order.
>I will be getting a complete dash 2 large 3 small and 2 in the 60mm
>size. I will have to measure and see if the tach and speedo are 100 or
>120mm. The smaller instruments are the 52mm size. I will be ordering them
>all in Durable.
>
>Thanks,
>
>PS I assume cash in a letter is best.
>
>----- Original Message -----
>From: <mailto:barrie@look.ca>Barrie Robinson
>To: <mailto:phulse@gte.net>P. R. Hulse
>Sent: Wednesday, June 01, 2005 11:37 AM
>Subject: Re: O-rings
>
>Phil,
>
>I did tell you I now have the 60mm in 'durable' did I not? My mind is a
>bit confused with preparations to get to the Terre Haute do (British V8 meet)
>
>
>Phil,
>
>Definately Durable !!!! I stopped calling them "show" quality as many
>took this to mean original. So give me a few days and I will see what I
>can do in 60mm. If you hear nothing in a week buzz me - my mind is on
>getting my MGB GT V8 ready for the Terre Haute show
>
>
>At 07:44 PM 5/23/05, you wrote:
>>Barrie,
>> Just to be sure the Durable is what we are talking about when I bought
>> my original set I believe you called them show quality "O" rings. I
>> have received many complements on the instruments and the dash in my
>> car. So, I don't understand why they don't sell. I think they are
>> great and I have the trophies to prove it. I have attached a couple of
>> photos of an 80mm gasket I cut down to 60mm for use on the clock.
>>
>>These is the Durable?
>>
>>If so, I will be buying another complete set plus I will want 2 in the
>>60mm size.
>>Phil
>>----- Original Message -----
>>From: <mailto:barrie@look.ca>Barrie Robinson
>>To: <mailto:phulse@gte.net>P. R. Hulse
>>Sent: Monday, May 23, 2005 9:22 AM
>>Subject: Re: O-rings
>>Phil,
>>I have those now but not in Durable. Just in Original which is the
>>square sectioned rubber O-ring. They are US$4 (US$5 with postage) as in
>>the price list I sent you. If you really really want the Durable I
>>MAYBE can get one but will take a week or two. I find that Durable is
>>the least popular and I am probably going to have stocks for centuries!!!!!
>>At 09:18 PM 5/22/2005, you wrote:
>>>Hi Barrie,
>>>I just came out of hibernation.
>>>The durable "O" ring I would like in addition to the standard sizes is 60mm
>>>to fit a 2.25" clock opening.
>>>I used Micro-soft Front Page to do my website.
>>>Thanks for asking.
>>>Phil
>>>----- Original Message -----
>>>From: "Barrie Robinson" <barrie@look.ca>
>>>To: <phulse@gte.net>
>>>Sent: Sunday, December 19, 2004 2:05 PM
>>>Subject: O-rings
>>> > Phil,
>>> >
>>> > Got to your site. What did you use to do your web page?? I want to do
>>>one
>>> > but have not looked at 'tools' yet!! Here is the latest O-ring price
>>> list
>>> >
>>> > Regards
>>> > Barrie
>>> >
>>> > Barrie Robinson
>>> > (705) 721-9060
>>Regards
>>Barrie
>>Barrie Robinson
>>(705) 721-9060
>Regards
>
>Barrie Robinson
>barrie@look.ca
Regards
Barrie Robinson
barrie@look.ca
[demime 1.01d removed an attachment of type application/rtf]
|