It's not on my MG/Triumph dist lists, as the 41220A was for an
Austin America (automatic at that)
1.50 @500 rpm 6.50 @1000 rpm 150 @2600 rpm
vac module spec 5/11/8 (starts at 5 in/hg, ends at 11 for a total
of 8 mechanical degrees of augmentation)
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From: "Paul Root" <ptroot@iaces.com>
To: "'mg listserve'" <mgs@Autox.Team.Net>
Sent: Wednesday, February 09, 2005 7:55 PM
Subject: lucas 25d
> After looking at a GRM article on MGB dyno tuning (February 2003). It
> made me think about the
> 25D dizzy I have in my garage. So I dug it out.
>
> I wanted to check the curves on it, so I went to the Teglerizer. But the
> model number
> doesn't appear in his chart.
>
> It's model number is 41220 A and 1068 4.
>
> Where can I find the curves on this. Would it be better than the 45DE
> w/pertronix?
> The article seems to say so. I'd put a pertronix on it eventually.
>
> Paul.
>
> Your messages not reaching the list?
> Check out http://www.team.net/posting.html
|