The removable frame had three round bars with flat ends. The middle bar
slotted into the body sockets, the front bar had a relatively large linkage
to the middle bar, and the rear bar a smaller linkage. There was an
optional folding frame with three bars and a header rail available at the
same time as the removable frame until 1970, after that only a different
folding frame was available. There were at least three tops, unless you
have the correct top to go with the frame you will get a poor fit.
PaulH.
----- Original Message -----
From: "Bob" <engl@accesscomm.ca>
To: "'MG List'" <mgs@Autox.Team.Net>
Sent: Friday, December 03, 2004 2:00 PM
Subject: Top Removable Frame
> What I received had two top bows and a round (tubular) base where it slots
> into the body bracket. I've checked catalogues and photos in books, but
the
> removable top frames all seem to have 3 top bows and a bar that fits into
> the bracket on the frame.
|